Premier Limited
Print-friendly version

Big Love Cycle Stand - ST19


Big Love Cycle Stand - ST19
£135.00 ex VAT
£162.00 inc VAT
Finish
Code: ST19
Size : 970mm high x 1070mm wide
Delivery: 2 Weeks
Big Love Cycle Stand

A larger version of the popular Tough Love design, this durable stand is made from 60mm diameter tube and is well suited to commercial environments.

Important note: Both front wheel and back wheel can be locked to the stand.


Big Love Cycle Stand with Armoured Sheen

Each stand caters for two bikes, one either side of stand

Technical Specification;

Height: 970mm  Width: 1070mm
Weight: Steel: 14.5 kilo, Stainless Steel: 11.5 kilo
Diameter: Steel: 60 x 3mm, Stainless Steel: 60 x 2.5mm
Fixing details: :  Bolt down base plate (but can be submerged in concrete)

Options;

ST19-GA - Galvanised no extra
ST19-GR - Galvanised and Powder Coated extra £15.00
ST19-BL - Rilsan® black nylon extra £15.00
ST19-SS - Stainless Steel extra £50.00 
ST-19AS - Armoured Sheen extra £65.00

See below for details and info on these options


Big Love ST19 Armoured Sheen Finish

Materials and Finishes


STAINLESS STEEL

Only use of certified grades of stainless
steel, a premium grade 304L is used to
manufacture the cycle stands ensuring a long
dependable service life.
After bending and welding they are hand polished
to a fine brushed finish.

GALVANIZED STEEL

Recognised for being long lasting and corrosion resistant.
All the galvanizing is certified to BS EN ISO 1461
and carried out after final manufacture ensuring a
consistently high product quality.

GALVANIZED & POWDER DUPLEX COATING

Used where a specific colour is required.
The stands are sweep blasted after galvanizing but
before coating to produce a key to ensure good
adhesion of the powder to the galvanized surface
minimising the risk of chipping.

A large range of RAL colours are available.

RILSAN® NYLON COATINGS

The ultimate long lasting thermoplastic coating for
steel. Rilsan® nylon is extremely hard wearing, scratch
and chip resistant, warm to the touch and kind to cycle frames.
The products are fully shot blasted before being
heated to 350oc and then dipped into the fluidized
bed of Rilsan® powder. On contact with the hotsurface the Rilsan®
melts and flows out to a smooth homogeneous coating fully encapsulating
the product, a process known as Rilsanisation
®.
Rilsan® is made from a renewable plant source and
provides the perfect solution to corrosion without costing the earth.

ARMOURED SHEEN ®
An exciting new development for street furniture
offering not only a much tougher finish than
conventional stainless steel but also enjoying an
amazing, long lasting, and maintenance free surface.
The stainless steel cycle stands are shot peened
in the fully automatic wheelabrator to give a work
hardened, scratch resistant surface.

They are then electro-polished, which is the reversal
of the electroplating process where a small amount of
material is selectively removed, leaving a highly corrosion
resistant surface with a beautiful bright sheen finish.

BS EN specifications:

After bending, hot dip galvanized finish to BS EN ISO 1461. Stainless steel type BS EN 10088-2, 1.4301 (304L).
Brushed satin polished to BS EN 10088-2, 2K (320 grit). Steel tube to EN10219 S235
Big Love Cycle Stand - ST19Big Love Cycle Stand - ST19
Click on image to enlarge
You may also like…
You may also like…